The best definition I have found for what ‘Classroom Management’ actuallymeans comes from Carol Weinstein and Nancy Schafer at Oxford Bibliographies:
Classroom management can be defined as the actions teachers take to establish and sustain an environment that fosters students’ academic achievement as well as their social, emotional, and moral growth. In other words, the goal of classroom management is not order for order’s sake, but order for the sake of learning.
When order breaks down in the classroom, student learning is affected and teachers’ stress levels, burnout and anxiety rise – which sometimes leads to teachers making the decision to leave the profession (McCarthy et. al., 2022). It is therefore in every teacher’s best interest to master the fundamental techniques of effective classroom management.
Today, I have invited Tina Hennessy, Head Trainer at Destination TEFL‘s Siem Reap centre in Cambodia, to share her top tips for teachers who want to improve their classroom managementskills.
I’m not sure if what they say about classroom presence is true or not – either you’ve got it or you don’t! If you do, it’s likely that you won’t have too many problems with classroom management, because more than half the battle is won just by your presence in the classroom. Students look up to you, and you have complete control over the class because you demand high standards from them.
If you need help, here are five tips that may assist with classroom management. As with most ailments: prevention is better than cure. Once you’ve lost their attention, it’s harder to rein them back in.
Here’s how you could prevent problems from cropping up:
Be prepared: Being prepared for your lesson shows in your body language and this reflects in your delivery of lessons, conversely being under-prepared shows too! A good plan, a complete set of resources (from working whiteboard markers and flashcards, to crib notes) – anything you need should be organised and ready for use, without you having to worry about them. As you segue from one stage to the next, your students shouldn’t have time for distractions. If, however, your transitions lead to dead time (time with your back to the class), you’re likely to have bored students who will find something else to do.
Use students’ names: calling out their names ensures they’ll do what they need to do, to not be “called out” for negative reasons. Rather than pointing and saying, “You at the back, please be seated”. (‘YOU’ will probably turn his/her head and pretend to look at another student and pretend they’re not at fault.) Using their names will leave no room for doubt. Learning their names also shows that you care, and knowing that their teacher cares, will give them more reason to stay engaged.
Limit distractions: This could mean anything from distractions on a student’s desk, to visuals in a classroom, to views outside the classroom, to sounds. Try to limit whatever is within your control. Establish classroom routines where students start the class with cleared desks – or have only what is required on their desks – no extra books, stationary, or even water bottles. If your students have phones, request them to turn OFF vibrate mode, or put their phones inside their bags, rather than in their pockets.
Use non-verbal hand signals: Avoid students calling out aloud to request permission to use the toilet, for example, by having a hand signal for the same. Design similar signals for other circumstances too. When the student gets your attention by doing the signal, a simple nod of your head will grant permission. Rather than him asking you a question and having you answer it – thereby distracting the entire class and possibly diverting your train of thought.
Call and response: We know all too well that even at the best of times, you’re going to have situations when you’ve lost their attention, the class is loud and they’re bouncing off the walls and you do actually need to try and rein them in! Here are my favourites:
T (teacher): “Yo! Yo! Yo!” Ss (students): “Yo! What’s up!” (Great for middle-schoolers.)
T: “1-2-3” Ss: “Eyes on me” T: “1,2” Ss: “Eyes on you“
Start the chant and continue till the whole class is responding. The first few times you do this, maybe some students won’t join in. Carry on – even if it means you’ve said it 8-10 times, and the rest of the students will egg on the “stragglers”.
And, finally, when all else fails, and your voice won’t work – stand still and silent with your right hand raised over your head. As you make eye contact with the students they must raise their right hand, stop doing whatever they’re doing and stop speaking. They make eye contact with the others who must in turn do the same. Think of this as the opposite of a flash mob. Once the entire gathering is quiet, you have their undivided attention.
Like our Facebook page and follow us on Twitter for daily updates.
Originally posted December 2017. Updated December 2022.
The Christmas vacation is finally here. Many of us in the teaching profession can now look forward to a good couple of weeks of much-needed rest and recuperation.
Our students deserve a break too.
I agree that time spent with family and friends is an absolute essential right now, but I’m also mindful of the workload and duties that will hit me like a tornado when I return to school in January.
When it comes to school holidays, I always see them as time to ‘go at my own pace’. The way I see it, I have two choices:
Do nothing for the whole holiday and totally chill out, returning to the normal barrage of work that hits every teacher at the start of Term 2
Still have a holiday and some rest but do some little things to get a head-start on things before I return to school
I’ve always found that trying to do option 2 is the best, even if I don’t get through all of the ‘head-start’ work that I plan to do.
Is this an admission of failure before I even begin? Maybe, but here are my plans made as realistic as possible: meaning that I can have a rest and do around 50% (minimum) of these things too:
Requisitions and orders: I’m a Science Teacher, so I need to order chemicals and equipment for my lessons each week. This Christmas my first priority will be to get all of my requisitions done for each week of Term 2, ahead of time. This will save me many a long night when I get back to school, and will help me to plan ahead and reinforce my long-term curriculum mapping.
Termly review: Every Christmas I make it a priority to evaluate where I am at now, and where I want to be with my classes by the end of the term. This kind of self-analysis allows me to see where I’m behind and where I’m ahead and how to address those issues. This is really important for final-level exam classes as they must have covered the whole syllabus and have revised by the time the terminal exams come along.
Getting back to gym: I’ve been slacking off lately (I said this back in 2017 too!). No excuses this time. I’ve got every day free for a few weeks so I’ll be up early and out for a jog before hitting the weights later in the day.
Responding to student e-mails: Some students in my exam classes will be e-mailing me with questions about past-papers, coursework and subject-specific stuff. If I can help, then I will help. However, if not urgent, then I will deal with these queries when I am back at school.
Clothes: I’m running out of a few things (such as shirts that actually fit me!). Time for a wardrobe mini-makeover so that I continue to look half-decent at work.
Writing my next book: My first book was quite well-received, as was my second (The Power of Praise: Empowering Students Through Positive Feedback) so I’ve decided to have a go at writing another. Ten Techniques Every Teacher Needs to Know will explore the themes of classroom management and assessment to inform learning in even greater depth and breadth than my first book, and will build upon the fundamentals covered in one of my most popular blog posts. I see this as ‘downtime’ for me because I really love writing. Can I count this as ‘relaxation’?
Going back to karate: Another thing I’ve been putting off. Time to get a regular schedule set up.
Contacting people I should have contacted ages ago. Chasing up old leads and projects that I’ve allowed to slip.
Of course, as well as all of this I plan to enjoy my freedom in Thailand as much as possible. A trip to Pak Chong (where The Big Boss was filmed), along with my long-awaited visit to the Death Railway in Kanchanaburi (still haven’t done that yet – it needs to go on the list!).
How will you use your free-time this Christmas? Is it all one-big holiday or can you think of some small ways to make your life easier when you get back to school?
Like ourFacebookpage and follow us onTwitterfor daily updates.
It was a mid-spring morning in 1996. I was 13 years old enjoying Science class with one of my favourite teachers up on the top-floor lab at North Wales’ prestigious St. Richard Gwyn R.C. High School.
I loved Science. The feel of the lab, decorated with preserved samples in jars and colorful posters and periodic tables and famous Scientists on the walls, along with the cool gas taps and Bunsen burners that rested on each desk. This was my favorite part of the school.
Today’s lesson was special though, and I remember it for a very unexpected reason.
We were receiving back our Forces and Motion tests today. I loved getting my tests back, not least because I always revised really hard and was used to getting at least 75% on each one.
I always used to do two things whenever I got my tests back:
Check that the teacher had added up the scores correctly
Check how to improve my answers
On this particular day I had lost marks on a question that was phrased something like this: ‘If a rocket is travelling through space, what will happen to the rocket if all of the forces on it become balanced?’
In my answer I had written: ‘The rocket will either continue travelling at a constant speed or will not move at all.’
Now, how do I remember this seemingly obscure moment in a sea of moments from high school, most of which I cannot recall? Well, that’s simple: My teacher came over and took the time and effort to verbally explain where I’d gone wrong.
I should have just written that the rocket will continue at a constant speed, not “or will not move at all”.
A one-to-one conversation that I’ll remember forever
This moment of personal, verbal feedback from my teacher was powerful and precious. Not only did it serve to maintain my momentum in Science learning, but it left me with visual impressions of the memory itself: My friends in the Science lab, the posters on the wall and even the sunlight shining over the glistening Dee Estuary which was visible from the Science lab windows.
This little story shows us the power of verbal feedback, and therefore the caution we should place on what we say to our students. Young girls and boys grow up to become men and women, and their teachers leave a number of impressions on them, some of which are permanent.
The trick is to ensure that the permanent impressions are useful, positive and productive: As was the case with my conversation with my teacher that day.
And not all impressions need to be verbal. Written feedback can be just as memorable.
Do you empower your students with the feedback you give?
Let’s now explore the fundamentals of effective student feedback that are easy to implement, and useful.
Peer Assess Properly – The Traditional Method
I first learnt the power of peer assessment back in 2008, when I had just moved to Thailand.
As a keen young teacher with two years of UK teaching experience, I found myself teaching students who were all very keen to do their best. Homework assignments and classwork seem to come my way on a real-time, live-stream basis, and I soon found myself inundated with work to mark.
At first, I tried the traditional methods of using a green or red pen to write lengthy comments on each piece of work. I had learned from my training in Assessment for Learning in the UK, that written comments that help the student to improve were much better than a letter grade or a score followed by a ‘Well Done’. I’d learnt about the ‘two stars and wish rule’ where I’d write two positive things about the work and then one item or target for improvement.
These ideas were great in theory, but I found that my weekends became shorter and shorter as I tried to write effective comments on every piece of work that came in. I was spending less and less time doing the hobbies I enjoyed, and I became quite the old grouch.
I finally expressed my concerns in the staff room one day and a colleague of mine said “You should do more peer assessment”. She was right.
I instantly started getting my students to mark their own work, and reflect upon it, and the results were astounding: My weekends became ‘me time’ again, and students seemed to learn better than they would from receiving my comments.
When students reflect on their work they develop a ‘growth mindset’
As I continued to develop my skills in assigning proper peer-assessment, I discovered that I was sometimes making some catastrophic errors. I refined my strategy over the years, and came up with this six-step system:
Step 1: Make sure that the work you set has an official mark scheme or set of model answers associated with it. There’s nothing worse than trying to ‘guess’ the best answers along the way as you’re trying to get the kids to assess the work. Make your own mark scheme if necessary, but make sure the answers are clear.
Step 2: When it comes time for the kids to assess the work, ask them to swap their work with someone else in the class. Alternatively, if this doesn’t work for your particular class, then collect the work in and redistribute it.
Peer assessment saves you time and energy, and is effective
Step 3: Ask each student to get a colored pen ready to mark with. Red and green are good. You may wish to have a set of special ‘marking pens’ somewhere in class that the kids can use whenever they mark each others’ work.
Step 4: Print the official mark scheme and give a copy to each student. This has the advantage of providing a permanent copy for each student to keep, and allows you time to help students as they mark. Projecting the answers onto a screen canalso work, but you may find that students cannot see and that you may have to scroll through at a pace that’s not suitable for every student. Printing a copy, or sharing it on the schools VLE so that students can access it via a tablet or laptop, is best.
Step 5: Make it very clear that students should tick the answer if it’s correct, and make full corrections if it is wrong. The mere act of writing out the model answer onto the work being marked will reinforce the concepts into the subconscious mind of the student.
Step 6: Let the students give the work back. Collect it in at the end of the lesson so that you can glance through and check that everyone has peer assessed properly. If anyone hasn’t, then make them do it again.
Once work has been peer-assessed, you can sit down with individual students and have ‘progress conversations’ designed to pin point areas of weakness and highlight areas of strength
You have to be quite organised with this method (e.g. making sure you print the mark schemes on time). However, this will save you loads of time and will definitely help the kids to learn properly.
Experiment with automated assessment
I wrote a blog postabout the effective use of ICT in lessons some weeks back, and I mentioned the first time I came across MyiMaths.
It was back in 2013, and it totally transformed my work life.
Why? That’s simple. Students would go into the ICT lab, or use their laptops or tablets in class, and literally be taught mathematics by the computer! The program would even assess the work immediately, and differentiation wasn’t a problem because students could work through the tasks at their own individual pace. The benefits were enormous:
All of the students were focused and engaged
All of the students were challenged
The teacher had more time to spend with individuals working on specific problems
The content was relevant and stimulating
No behavior management issues as the students were all quietly working
No time was needed by the teacher for marking and assessment. The program did all that for you. All you had to do was collate the data.
Instructional software can provide quick and comprehensive feedback to students, with little involvement from the teacher
There are numerous instructional software programs on the market today that save the teacher lots of marking time, and provide the students with engaging material to learn from, Whilst I wouldn’t advocate using instructional software every lesson, it certainly can become a big and effective part of your teaching arsenal.
Give verbal feedback the right way
Verbal feedback is a great way to have a personal one-to-one conversation with a student. It can help you to address systemic, widespread issues (e.g. not writing down all of the steps in calculations) and it can be a great way to motivate each student.
However, many teachers are only going so far with verbal feedback and are not using it as the powerful tool it is.
Take this piece of KS3 Geography work for example:
Geography work from an 11 year old, shown to me on 21st June 2016
I received this work from a parent at dinner, who knew I was an educational author, on 21st June 2016.
You’ll undoubtedly have noticed the dates on the work: 1st December and 8th December 2015. I’m sure you’ll have shuddered upon the realization that this work hadn’t been marked in seven months! No peer-assessment, no self-assessment and no comments from the teacher. There aren’t even any ticks! Add this to the fact that this boy’s entire notebook was completely unmarked, just like this, and you can begin to understand why I nearly had palpitations in front of several avid noodle and rice connoisseurs!
When I asked the boy about why it wasn’t marked, he said that this teacher never marked worked, he just gave the occasional verbal feedback. My next obvious question was to ask what verbal feedback he’d received about this work. He said he
With teacher workloads increasing globally, this kind of approach is, unfortunately, not uncommon, However, verbal feedback need not be time-consuming and can be executed in a much better way than is seen here in this Geography work. Here are my tips:
1. Set your students a task to do and call each student one-by-one to have a chat about their work. Be strict with your timings – if you have a 40 minute lesson and 20 students in the class then keep each conversation to two minutes.
Mention the points for improvement and use sincere praise to address the good points about the work. Ask the student to reflect on the work too.
Once the conversation is over, write ‘VF’ on the work, and ask the student to make improvements to it. Agree on a time to collect it in again so that you can glance over the improvements.
As you can see, this simple three step approach to verbal feedback generates a much more productive use of time than simply having a chat with the student. Action has to be taken after the discussion, and this places the responsibility of learning solely in the hands of the student, which is where it should be.
Be specific in your comments
Sometimes it is appropriate to collect student work and scribble your comments on it with a colored pen. When you do this, make sure your comments are specific and positive, Take a look at these examples, which all serve to empower the student:
A piece of IBDP Biology homework. Comments are designed to empower and motivate the student, and address areas of weakness
An end of semester test. Comments refer to specific progress made, and areas that require further attention.
This piece of work was sent as a photograph via Skype. The teacher has added word-processed comments and an encouraging smiley.
Peer Assess Properly – The Technological Method
A growing trend that is proving popular with teachers is to use Google forms in the peer assessment process. I wrote about this in my book, and I’ve included the extracts here:
A good form for students will look something like this:
There are many alternatives to using Google forms. For example, you may wish to create a form via your school’s VLE, or even get the students to send each other their work through e-mail or a chat application (although this will remove anonymity). Either way, peer assessment with technology will save you time and provide your students with quick, detailed feedback.
Make sure students improve their work
A common theme you may have spotted in this week’s blog post is that of improvement. Students should always improve the work that’s been marked or assessed. This serves two purposes:
The student will get into the habit of giving their best effort each time. After all, a great first attempt means less effort needed in the improvement phase
The process of improving a piece of work serves to firmly cement concepts in the subconscious mind of the student, aiding memory and retention
Don’t forget to use rubrics, mark schemes and comments – students can’t possibly improve their work without these.
We welcome you to join the Richard Rogers online community. Like our Facebook page and follow us on Twitter for daily updates.
Advertisements
Occasionally, some of your visitors may see an advertisement here
Updated: October 2022 (Originally posted May 2017)
I received a message from a very stressed out Newly Qualified Teacher a few weeks ago. It pertains to a problem that many educators face: dealing with homework. When I told her that I was planning to write an article about this very issue, she agreed to share her message with all my readers:
Dear Richard. I’m about to finish my first year in teaching and I’m really ashamed to admit that I haven’t been able to mark my students’ homework on time each week. In fact, I’ve set so much homework that it has just piled up and piled up over the course of this year, to the point where I now have a literal mountain to deal with! I’m kind of hoping that most of my students will forget that I have their work, and this seems to be happening as some of it is months old. I’m so stressed out! How can I make sure that this never, ever happens again?! – G
A letter from a stressed-out NQT. Are you facing similar challenges?
Being overwhelmed with marking, particularly that caused by homework, is a common problem for new and experienced teachers alike. In this article, I’ll examine the best ways to design and organise homework, as well as ways to avoid being bogged down and ‘up to your eyeballs’ in paperwork. If you would like an audio version of my strategies, then please listen to this excellent UKEdChat podcast (highly recommended for anyone who wants to get better at assigning and organizing homework)here.
An AMAZING book! A must read for all teachers!
Consideration #1: Homework is not pointless
It’s really important to make this point from the outset. A number of articles have come out in recent years causing us to question the merits of setting homework. At one point, this mindset became so mainstream that I remember sitting-in on a departmental meeting in which a number of teachers suggested that we shouldn’t set homework at all, as it is totally pointless!
This might be a nice excuse to use to avoid some paperwork and marking, but unfortunately it’s not true at all.
In my experience, homework is only pointless if the kids never ever receive feedback, or if the homework doesn’t relate to anything on the curriculum. Then, of course, their time has been wasted.
I’ll always remember one school I worked at where all of the teachers had set summer homework for their students. Piles and piles of homework were set, including big, thick booklets full of past-papers. Guess what happened when those students returned to school the next academic year; many of the teachers had changed, and the work was piled up in an empty classroom and never marked. What a tragedy!
We’ll explore some ways in which we can give feedback in a timely manner today, as well as ways in which we can design our homework properly.
Consideration #2: Think carefully about the purpose of each piece of homework you set
This is crucial. Ideally, all homework should fall into one of four categories:
To review concepts covered in class
To prepare students for new content they will cover in class
To prepare students for examinations (e.g. with exam-style questions, revision tasks and past-papers)
A combination of two or three of the above
If the homework you are setting does not fall into these categories then you are wasting both your time and the students’ time by setting it.
Consideration #3: Think carefully about how much time the students will need to complete each piece of homework
Homework affects whole families, not just the kids you teach
This is an important consideration. Put yourself in the students’ shoes. Is this homework too demanding, or too easy for them? Will they actually have enough time to complete it? Is your deadline reasonable?
Consideration #4: How much self-study or research will your students have to do to complete your work? Where will they get their information from?
If the piece of work you are setting involves preparation for content or skills soon to be covered in class, then your students might have to do some research. Is the level of self-study you are asking of your students reasonable? Are they old enough, and mature enough to be able to find this information on their own? If not, then you may need to give some tips on which websites, textbooks or other material to look at.
Consideration #5: Can you mark this work?
This is such an important consideration, but can be overlooked by so many teachers who are in a rush.
Think carefully: if you’re setting a booklet of past-paper questions for ‘AS’ – Level students, then how is it going to be marked? Crucially, how will the students receive feedback on this work? And remember: homework really is pointless if students don’t get any feedback.
Be honest with yourself. If you honestly don’t have enough time to mark such large pieces of work, then it’s much better to set smaller, manageable assignments. At least that way your students will get some feedback, which will be useful to them.
Also, don’t try and do everything yourself when it comes to marking. Use peer-assessment, self-assessment and even automated assessment (such as that found on instructional software) on a regular basis. Be careful though – make sure you at least collect in your peer-assessed and self-assessed assignments afterwards just to be sure that all students have done it, and so that you can glance over for any mistakes. Students can be sneaky when they know that the teacher is trusting them with self-assessment each week by simply providing the answers to the work.
Another good tip is to spend some time on the weekend planning your homework for the week ahead. What exactly will you set, and when, to allow you enough time to mark everything? How can you set decent homework that’s not too big to mark? An hour spent planning this on a Saturday is much better than four hours cramming in a marking marathon on a Sunday because you didn’t think ahead.
Consideration #6: Are you organised enough?
Not to sound patronizing, but are you, really?
If you’re a primary school teacher then you’ll be collecting in assignments relating to different subject areas each week. If you’re working in the high school, then you’ll you’ll be collecting in work from potentially more than a hundred students on a regular basis.
You need to have some kind of filing system in place for all of this work. Maybe a set of draws? Folders? Trays? Electronic folders?
One strategy that absolutely works for me is that I get all of my students to complete their homework on loose sheets of paper, not their notebooks. Why? Because if they do it in their notebooks, and I haven’t had time to mark their work by the very next lesson, then it’s a nightmare having to give back notebooks again and collect them in continuously.
With loose paper its easy. I collect it in, and put each group’s assignments in a set of trays. I have one set of trays for work collected in, and one set for work that is marked. It stops me from losing students’ work and losing my sanity at the same time! The students then glue the work into their notebooks afterwards.
In addition to organizing my paperwork, I also organise my time. I use every Saturday morning for marking, which really saves me lots of headaches during the week. Do you set aside a fixed slot each week to do your marking?
Summary
Think carefully about the purpose of each piece of work you set
Don’t set work that will take the students too long, or too little time, to complete
Think carefully about the demands of any research that students will have to do. Maybe you need to point them in the right direction?
Use a variety of assessment strategies to mark student work. Don’t make assignments so big that you just don’t have time to make them.
Make sure you have some kind of filing system in place, so that you don’t lose work.
We welcome you to join the Richard Rogers online community. Like ourFacebookpage and follow us onTwitterfor daily updates.
A dissertation is a paper that graduate students must write as part of their academic requirements to earn their Master’s or PhD. Some high school curricula, such as the IB Diploma, include some kind of extended writing task that is similar (e.g. the Extended Essay in the case of IB). The paper is typically based on original research to prove that a candidate has mastered the subject and its relevance in society. Therefore, it is an extensive research paper with comprehensive content, including images.
Using images in a dissertation project
There are no rules against using images in a dissertation project. However, it would be wise only to use them when necessary. Images are particularly appropriate for visual art or film dissertation projects. Examiners can check the images in such areas to analyze your creative work.
Regardless of why you use the images, they should be clean and clear. For this reason, a background eraser should be your friend if you choose to insert images in your dissertation project.
Cleaning up images for your dissertation
Dissertation images are unlike other images included in content writing. For instance, they do not serve decorative purposes. Instead, they are critical to explaining the content of the dissertation. So, examiners will use them to grade your paper. For these reasons, you cannot submit a blurry or low-quality image.
What follows are some guidelines for cleaning up images for your dissertation.
#1: Remove the background
You can clean up the image by removing the background. However, only do this if the background does not contain relevant information. Removing the background will make the focus object clearer. It will also declutter the image.
#2. Remove defects from the images
You can also clean up the images by removing defects from your picture. Such image defects include:
Blurriness caused by shaking of the camera or subject when taking the photo
Chromatic aberrations, like unwanted color lines around dark objects in the photo
Unwanted orbs in the photo caused by lens flare
Improper field of depth, where a specific portion in the image appears sharper than others
Removing the defects above will increase the image quality and make it easier to interpret. The cleaner the image, the easier you can portray what you want in your dissertation paper.
#3. Remove unwanted people, objects, and text
Another way to clean up your dissertation image is by removing unwanted people irrelevant to the image’s purpose. Also, you can remove people from who you do not have permission to feature in your project. Additionally, you can remove unnecessary text from images, especially when using images created by graphic tools.
Removing unwanted objects from the image will make it less “noisy.” This means that the image will focus more on a primary object instead of being too cluttered. Also, it may save you from copyright or consent issues.
However, while cleaning up your dissertation image, especially if you are an art student, it would help to be keen not to strip it of its unique qualities. Sometimes, the backgrounds and what you consider “noise” may be your image’s “it” factor.
Conclusion
When using images in a dissertation, it would be wise to consider the specific guidelines and rules. For instance, in the US, all images used in dissertations and academic papers must either be copyrighted by the author or referenced in the manuscript. The guidelines may differ depending on the location.
So, researching the guidelines would be wise if you are an international student studying abroad.
We welcome you to join the Richard Rogers online community. Like our Facebook page and follow us on Twitter for daily updates.
Originally posted on August 18th 2019. Updated on September 3rd 2022.
Accompanying video:
Getting back into the swing of things can be a challenge: especially after a long summer vacation. Our body clocks are normally out of sync and we’ve probably been taking life a bit easy for a while (and rightly so).
The new academic year pounces on us like a monkey from a tree.
In order to be prepared for the craziness ahead I’ve devised a list of ten things to do prior to the first day back at school. Follow these magic tips and you’ll be energized, prepared and ahead of the game.
Tip #1: Create a regular sleeping pattern
Get up at your normal ‘work day’ time each day for at least a week before school starts. This will calibrate your body clock so that it’s easier to get up when school begins.
It’ll be hard at first – if you’re like me then you’ll be exhausted at 6am. Just try it – force yourself to get used to getting up early.
Tip #2: Set up a morning ritual
Come up with a sequence of events that will inspire, empower and energize you each morning. For me, my morning routine looks like this:
Get up at 4.30am
Go to the gym (it opens at 5am)
Work out at the gym
Shower at the gym
Have coffee and breakfast at the gym lounge
Read over e-mails and lesson plans for the day ahead
Leave the gym and be at school by 7am
Getting the hardest things done in the morning (e.g. exercising) is a very empowering way to start the day. This ritual of mine also serves to give me energy – I’m not rushing to school and I’m fully breakfasted, coffee’d-up and mentally prepared before the school day even starts!
Tip #3: Learn about the A.C.E. method of post-pandemic teaching
The best way that we can re-integrate our students after so much disruption due to lockdowns is by facilitating the following:
Action: Include lots of kinesthetic activities in your lessons.
Collaboration: Get students working together in groups (see my blog post here for more advice about how to do this).
Exploration: Encourage deep learning through problem-solving and research-based tasks.
I’ve a quick video all about the A.C.E. strategy here:
Tip #4: Read ahead
Whether you’re teaching the same subjects again this year, or if you’re teaching something totally new – it always helps to read ahead.
Go over the textbook material, watch out for subtle syllabus changes and make sure you read over the material you’ll actually give to the kids (PPTs, worksheets, etc.).
Tip #5: Prepare ahead
Linked to reading ahead but involves the logistics of lesson delivery – make sure your resources are prepared.
Don’t forget – every teacher will be scrambling for the photocopier on the first day back. Prepare your paper resources in advance, or plan to do photocopying at ‘off-peak’ times (e.g. late after school one day).
Tip #6: Set personal targets
Is there anything that you could have done better last year?
If you’re a new teacher, then what are some life-challenges that have held you back in the past? Procrastination? Lack of organization?
We all have things that we could do better. Think about what those things are for you and write down a set of personal targets in your teacher’s planner. Read them every day.
One of my targets, for example, is not to set too much homework but to instead select homework that achieves my aims most efficiently.
Available for Pre-Order on Kindle now. ONLY $3.99
Tip #7: Get to know your new students
Spend time talking with your new students and take an interest in their hobbies, skills and attributes.
Look at previous school reports if possible and find out if any of your new students have any weaknesses in any subject or behavioral areas. Talk with members of staff at your school about ways to accommodate and target such needs if necessary.
You may be working very closely with certain individuals this year. Perhaps there’s a school event coming up after Christmas that will involve collaboration with a colleague.
Maybe you’re running an after-school club that requires assistance from another person.
Find out who these ‘key colleagues’ are, and start reaching out to them early. Professional relationships between colleagues are built on trust and, crucially, time.
Tip #9: Get your planning documents ready
These documents may include:
Schemes of Work
Curriculum Maps
Unit plans
Individual lesson plans in your teacher’s planner (the absolute minimum)
Here’s a video I made about efficient lesson planning which you may find helpful:
Tip #10: Prepare your marking schedule
Look at your new timetable, when you get it, and figure out:
When you’ll set homework and when you’ll collect it in (you may need to refer to your school’s homework timetable too)
When you’ll mark notebooks
Look at your free periods, after-school time and times when you’re not in-contact with the kids. Try to maximize on this time by getting a regular marking schedule in place.
Don’t forget – your weekends belong to you. Don’t use those for marking (I recommend) – life is too precious.
Tip #11 – Get your clothing sorted
Don’t under-estimate the importance of this. We don’t need to break the bank and splurge on a new wardrobe every year, but we do need to:
Make sure we look presentable
Make sure our clothes are in good condition
Think about:
Making repairs to old clothes (three of my suit jackets needed buttons replacing this summer, for example)
Shoes – I like to have a few pairs so that they last longer. When I’ve worn the same pair of shoes every day for a year they’ve tended to wear out quickly.
Socks – they get holes in them and the elastic can fail
Dry cleaning – some of my ties and suits really needed a good dry-clean this summer
We welcome you to join the Richard Rogers online community. Like our Facebook page and follow us on Twitter for daily updates.
As your children’s high school career nears its end, achieving good grades becomes ever-more important. There’s a lot at stake, in particular, the range of colleges from which they can choose after graduation. And with the cost of a college education being so high, excellent grades could be worth money in the form of bursaries and sponsorships. Even kids that don’t want to study further need to work hard. If a high school diploma is to be their highest educational achievement, it will be with them for the rest of their working careers.
While being a pushy parent can be counter-productive, keeping your children motivated in their final years of high school can be a challenge. Try the following strategies to improve their chances.
#1: Get Help From a Private Educational Counsellor
Can you offer the right guidance for your child to get into top colleges? Chances are, you need an inside edge. Going Ivy College Consulting works with your children to help them map out their future for themselves, choosing the right courses and the right elite colleges to set them up for success.
If going ivy isn’t on the cards, career counselling can still be enormously beneficial. Having an impartial third party to talk to about their future helps your children to feel more in control of their future learning and career paths. With a future they decided for themselves to look forward to, the chances of giving their final years at school their best effort becomes more likely.
#2: Be Supportive
Parents want to see their children embarking on a secure career. Sadly, this can lead to conflict and a lack of motivation at school. For example, your daughter says she wants to study drama. You’re horrified and suggest accounting instead. With your support for what she really wants to do being absent, how motivated will she be as her final high school year draws to a close? Will your support for her exam preparation make a difference?
If you think your child is making a risky career choice, tell them about your concerns by all means, but never withdraw your support. Your aspiring drama student will open several career paths through her studies. For example, if she isn’t able to become a movie star, she can still apply her skills to teaching theatrical skills to kids. Whatever happens, remember that it’s up to your children to choose their careers, and not up to you.
#3: Give Them Time
Although you feel that choosing a future career is an urgent matter, your high schooler may not feel ready to commit. Let’s be fair. A school student has no experience of the working world, and may not have found his or her passion yet. Some kids need to spend a year or two in the working world before they discover what they really want from a career. Push too hard, and your children might end up studying something they committed to on a whim only to find that it isn’t really for them.
By all means, provide opportunities for them to explore possible careers, but make it clear that you aren’t pushing for a big decision just yet. When they find a career they can fall in love with, you’ll be ready to support them. Until they find their path, you’ll still be there for them whenever they need you. Apply too much pressure, leave your child with the impression that it’s about you and not about them, and they might decide the whole thing is a nasty business and start underperforming at school.
Strike the Balance
We all have ambitions for our children, but ultimately, their future is up to them. Although you may not be sure that your children are making the right decisions, your role is that of wise counsellor and ardent supporter. It can be difficult, but the decision maker in this instance is your child. Opposing their wishes or pushing too hard will be counter-productive. Help your child to build a vision of his or her future that’s all their own.
We welcome you to join the Richard Rogers online community. Like our Facebook page and follow us on Twitter for daily updates.
According to Fortune Business Insights, the global virtual reality in education market is booming, and is projected to grow by an average of 45.2%, every year, between now and 2029. Teachers everywhere would be wise to skill-up and take courses in Virtual Reality EdTech in order to get prepared for the exciting changes we will soon see in our classrooms. Today, I’ve invited Kiara Miller from The Speakingnerd to share her insights into how VR will change the way we do things as educators for many years to come.
Kiara Miller
Gone are the days when all you had to do was walk into a classroom, explain a concept, dictate notes, and call it a day. These days you can offer your students more than that, thanks to technology. Technology in the education sphere is a hot topic and trust me, it will remain so as long as the world continues to embrace it.
Nowadays, teachers can offer students meaningful and impactful learning experiences using Virtual Reality technology (VR). According to this recent report by Global News Wire, the virtual reality market in the education sphere is expected to reach $8.66 billion in 2022, at an annual growth rate of 36%. In fact, 97% of students in technologically developed/developing countries would like to study a VR course.
360 VR is a type of VR that is commonly used in education. It offers immersive experiences by using specialist cameras and equipment to capture real-world locations. The content is then viewed on VR headsets or projected onto walls. Students don’t have to leave their classrooms or spend a lot of money to travel to locations that were once imagined. Virtual trips can happen anywhere and anytime as long as the students have the right equipment.
In a world where it is increasingly becoming difficult to attract students’ attention, engage them or keep them motivated to pursue studies, virtual reality technology seems to have the potential to provide at least a partial solution. It is associated with a range of benefits that we are going to explore together today.
The 7 Vivid Ways Virtual Reality can Transform School Education
What are your thoughts about students vividly seeing what is being taught rather than imagining things? STEM subjects such as biology, computer science, and architecture require hands-on experience for students to obtain a deeper understanding of the concepts and to build their expertise. Virtual reality allows educators to embed really impactful learning experiences into their curricula.
We live in a world that is increasingly dependent on technology and obtaining digital skills is seen as the way forward for future professionals. Using virtual reality in schools helps to provide in-depth knowledge to students on what is being taught. They can zoom in and out of locations that are a thousand miles away, observe how human blood flows throughout the body and even conduct specialized surgery.
VR brings things closer to students and makes things a reality that could have been impossible to relate to otherwise. It also allows students to interact with objects, chemicals or scenarios that could be too dangerous to interface with in the real world.
#2: Intricate concepts are simplified
There is nothing that hurts quite like like teaching a concept to students and then receiving negative feedback at the end of it. Teaching is a profession that requires patience, especially when describing and explaining difficult concepts or topics to students who may not have the ability to grasp the content immediately.
VR technology can help students to decipher intricate concepts with the help of images, videos, or virtual tours. VR is also an excellent add-on to a range of active-learning strategies since users are immersed in, and interact with, 3D worlds.
Intricate concepts are not easy to unpack and yet they also vary in their degree of complexity. Cases where learners can’t visualize what a teacher is talking about tend to produce confusion. Students tend to become passive learners in such scenarios, which negatively affects their performance. VR technology offers a solution in that it can be introduced to classrooms to help students get a clear view of the concepts being taught.
#3: Increases engagement
Unlike traditional teaching methods, Virtual Reality can fully immerse students in the lesson being taught. Seeing something for the first time or that which seemed impossible increases enthusiasm and also maintains a high level of attentiveness. With the help of virtual reality tools, students can connect to worlds and objects which are normally out of their reach.
VR also stimulates higher levels of imagination which helps students understand concepts better than when just reading about them. The interactions enabled by VR help to keep students’ engagement high throughout the lesson.
#4: Increases practicality
Reading about something is different from having hands-on experience. Students that put more emphasis on learning concepts than practicing them find themselves increasingly left out. In simple terms, knowledge without practicality has a limited impact on students. For certain fields like biology, engineering and computer science, practical skills are vital to survival in an increasingly competitive world.
VR can increase students’ ability to understand concepts, implement what is learned and think of new ways of doing something better. Reading about something and learning how it works helps students believe that they are set on the right path. Also, it helps them set SMART Goals which are believable and achievable. With that, virtual reality offers a new meaning to education, by letting students know that they can put to use what’s learned.
Teaching makes a difference when learners are able to put what’s learned into use. In today’s world where skills are the top need of the hour, in-school training is essential and VR can help out. Using VR in class lays a platform for deep learning which helps students understand content better than when only surface learning takes place.
#5: It’s all-inclusive
Virtual reality has a wide range of applications in the education sphere. It can be used in architecture, philosophy, design or even in science classes. Videos can also be produced in a range of languages. On the other hand, it is suitable for all types of classes whether those occur in-person or remotely. Additionally, every student gets the chance to participate in and enjoy the experience: something which cannot be said for the majority of traditional teaching methods.
#6: Increases Retention
The purpose of teaching is to offer knowledge that can help students academically perform better and excel in their careers. However, the traditional teaching approaches, which tend to be text-based, do not offer optimal learning outcomes. With this approach, students tend to easily get bored, lose interest in science subjects and even perform poorly in exams due to low retention levels.
VR is changing students’ school experiences by enabling effective learning to take place. Scientifically, the brain processes images better than text. This means that students can easily learn, retain and memorize what is taught in class with the help of VR technology. VR can also rewire the brain and enhance the neural relationships that are required for memory and learning to take place.
We welcome you to join the Richard James Rogers online community! Join us on Facebook and Twitter for regular updates, giveaways of Richard’s books, special offers, upcoming events and news.
I’m currently working through an excellent online course offered by the University of Queensland via EdX. The course is entitled ‘Deep Learning through Transformative Pedagogy‘. It’s absolutely fascinating and I would highly recommend the course for any teacher who is serious about helping students prepare for examinations, catch-up on missed work or understand complex content.
In today’s blog post I aim to share:
What I have learned about deep and surface learning from the course so far
Some practical ways in which deep learning can be encouraged in the classroom
So, get ready for a deep dive into this compelling topic!
A brief history behind the development of deep learning practices (and why surface learning is no longer enough)
The course began with brief history of schooling, and how technology has been a key driver for the need to educate children. The point was made that surface learning (e.g. memorization of facts) may have been sufficient in the past. However, for our learners today, facts can change very quickly. Skills need to be upgraded regularly and throughout one’s life. As a result, teaching has seen a massive shift from teacher-centred approaches to those which are learner-centred. Contemporary pedagogical approaches, such as constructivism (where students are active participants in their own learning and construct new knowledge based on links to current understandings and prior fundamentals) have an important role to play in this new, digital age.
It’s important to remember throughout today’s blog post that effective and active learning are two sides of the same coin: to be effective, learning must be active. Research shows that learner-centred approaches to teaching that change and develop student thinking get better results in terms of student learning outcomes than traditional information transmission methods.
What is deep learning, and how is it different to surface learning?
Deep learning means asking big questions. When students have the opportunity to explore a topic: asking the why, what, where, when and how behind some concept, idea or process, they learn a plethora of different things and extend their knowledge and understanding.
Surface learning involves rote memorization, and I saw a lot of this happening when I worked in China. Examples included colleagues who had very high-level credentials from top universities in Asia, but who were unwilling to perform classroom practical tasks/experiments with students because either ‘the students didn’t need to do that to pass their exams’, or the teachers themselves felt nervous due to inexperience. This seemed to really show itself in one subject in particular, however: mathematics. Students would be trained to learn lots of formulae, and would be given an astronomical number of drill questions to do for homework. However, when it came to applying the mathematics to an unusual or real-life problem, many students struggled.
Since taking the online course with the University of Queensland, I’ve learnt a number of interesting facts about deep learning:
Deep learning often involves revisiting and reviewing a topic, and can be achieved through tasks in which students are involved in active problem-solving.
Neuroscience teaches us that the brain is plastic, and that chemical changes actually occur during deep learning. Deep learning involves consolidation of knowledge, and is driven by protein synthesis in the brain. Animal studies have shown that when protein synthesis in the brain is blocked, only surface learning occurs.
Deep learning is a process of integrating new facts we learn about the world into our existing semantic framework.
Deep learning can be achieved when students are given the opportunity to discover content, knowledge and skills for themselves.
Deep learning Involves an analysis of the information being collected, allowing a more complete understanding than surface learning can provide.
In contrast to deep learning, surface learning concerns itself only with the knowledge, ideas and content present in a curriculum. Deep learning is all about relating or extending all of that. This surprised me to some extent, as I thought that learning high-demand content (e.g. redox equations in IB Chemistry) would be considered deep learning, when actually it’s just surface learning (even though the content may be considered ‘advanced’). Deep learning would occur when the student is able to apply their knowledge of, say, redox equations, to unfamiliar or extended contexts – such as when the student is tackling sub-sections of an IB HL exam paper in Chemistry, or designing and implementing an experimental investigation into the topic.
It’s important to note that there isn’t a clear-cut distinction between surface and deep learning: rather, there exists a gradation between one and the other. A progression is made from having an idea to having many ideas (surface learning), to relating and extending those ideas (deep learning).
Whilst the progression from surface learning to deep learning follows a continuum, it is also cyclical – as students begin to relate and extend ideas, they come up with new ideas which brings them back to the surface learning part of the cycle.
What kinds of activities can teachers do in the classroom to encourage deep learning to take place?
The Flipped Classroom: This was something completely new to me which I discovered on this course, and it was really enjoyable to learn about this novel approach to teaching and learning. The basic idea is that pre-reading is done at home and homework is completed in class! The students come to class already prepared with some fundamental knowledge, and then complete activities based upon what they have read. Collaborative activities (e.g. using Padlet) are really good for getting students to reflect on their learning. In terms of the pre-reading to be done at home – this doesn’t actually have to be reading. Short, 5 minute videos that the students have to watch may be enough.
Give students some prompt material (e.g. a website to use, an information sheet, etc.) and ask students to CREATE something from it. Good things to create include a Google Slides presentation, a Google Site, a Google Doc summary, an infographic, a stop-motion animation, a quiz (e.g. a Kahoot!) and so on. Please note: If you ask students to create something, then make sure they present it to the class in some way (e.g. a short talk). Students can work in groups for activities like this. I’ve written a separate blog post about encouraging creativity in the classroom here.
Since deep learning can be achieved through revisiting and reviewing content and skills regularly, journaling and past-paper practice can meet the necessary requirements. With past-paper practice, however, make sure that the students make full corrections, and can somehow articulate why they made made mistakes. The process of completing, correcting and reflecting on past-exam paper questions (or exam-style questions) is a problem-solving sequence in and of itself – hence a deep learning activity.
Practical work that allows students to explore an unusual context, or an extended part of a topic, can definitely encourage deep learning to take place – especially if the students have been involved in the creative design of the task themselves in some way. Think about opportunities you can create for students to design and implement their own experiments, presentations, model-building and practical/hands-on work (e.g. welding together an iron gate, making an item of clothing, building the circuitry for a small radio – it will depend on the subject you teach, of course).
We welcome you to join the Richard James Rogers online community! Join us on Facebook and Twitter for regular updates, giveaways of Richard’s books, special offers, upcoming events and news.
Past-exam papers provide teachers with the opportunity to train students in time-management, exam-technique and key skills, since they provide students with exposure to the same style of questions that they will encounter in their final exams.
Think about anything at which you’ve become proficient: be that riding a bicycle, martial arts, painting, yoga or anything – it was practice (and lots of it) that made you proficient at that thing. Natural abilities will, of course, contribute to mastery, but ultimately the greatest way to achieve superiority in any endeavor is through practice.
Past-exam papers provide students with the vital practice they need to succeed in the final exams, and today I would like to go through some ways in which we can use past-papers in the classroom with our students.
Tip #1: Create end-of-unit assessments from past exam paper questions
Whenever I reach the end of a topic I use past-paper questions to test my students’ knowledge and understanding of what they have learned. These questions can either be pulled off pdfs through screen captures, or they can be built using question banks. Currently, I teach KS3 Science, Edexcel IGCSE Physics and Chemistry and IBDP Chemistry – and all of these courses have great question banks for teachers to use: namely Testbase for KS3, ExamWizard for Edexcel, and the IB Questionbank for IB subjects.
Of course, these question banks are not free, but they are worth the slice into the school budget in my opinion as they provide teachers with a very quick way to build test papers from past-paper questions. Another massive advantage of question banks over full pdf past-papers, other than speed and efficiency of test-building, is that questions are categorized by topic or syllabus statement too. Question banks will also automatically add up the question scores for you, saving you further time as you calculate how much the test should be out of.
And on that point: total marks – make sure you calculate your mark-to-time ratio too. For Edexcel IGCSE Chemistry, for example, students have to complete 110 marks in 120 minutes – i.e. about 65 seconds per mark. This means that when I am assigning a 1 hour test for this subject, it needs to contain 55 marks of questions. Any less that this and I’ll be giving the students too much time to complete the paper, which won’t be an effective ‘model’ of the real exam.
Tip #2: Use past-paper questions for in-class structured revision
Create special test papers that are built from past-papers and give them to your students to complete during normal lesson time. This, of course, works great when students are preparing for an imminent end-of-unit test or terminal examination (e.g. an end of year exam). Consider the following:
Students should receive quick feedback during these sessions, and should know exactly where they have lost marks (and why). Include enough questions to be completed during the lesson, along with enough time for checking through the mark scheme in a final peer or self-assessment exercise. In my case, for example, most of my lessons are 1 hour long. This allows me to create a 40 minute paper, with 20 minutes left over for marking and feedback.
Always provide the official mark schemes, so that students become familiar with the language and skills needed to gain top marks.
If possible, allow for a 5 or 10 minute discussion at the end of class to go through difficult questions, common misconceptions that are tested by the paper and even command terms like ‘evaluate’, ‘describe’ and ‘explain’.
During the final feedback and marking part of a revision lesson, tell your students to be VERY STRICT when checking the answers. If the answer that is written does not match the mark scheme word-for-word, then it could be wrong, and the student should come and seek your advice.
There are some nifty ways that you can make lessons like this more active, engaging and spatial for learners than they would be otherwise. Some ideas you might want to try are as follows:
Cut up the questions and answers (i.e. physically, with scissors). Give students one question at a time, and when they have finished they can come and collect the official answer from your desk.
Provide students with the official answers, one at a time, and ask them to write the question that each answer pertains to.
Consider using live quiz-based apps that have quizzes built from past-papers on them.
Play learning games with your students and use past-paper questions, key vocabulary and command terms to create the questions.
Please be advised that when students reach a certain age (i.e. mid-teens and older), their exams become very content-based and, therefore, revision lessons need to be quite intense in order to be effective. The odd ‘fun’ lesson here and there containing learning games and competitive quizzes can offer a nice break from the intensity of completing whole papers. However, ‘fun’ lessons like these tend to be less efficient at embedding high-demand content than, say, a lesson in which students complete a 40-minute assessment filled with past-paper questions.
#3: Create homework assignments from past-paper questions
This is a great way to train students in time-management. Make sure your learners know the mark-to-time ratio for your subject (e.g. 1 mark per minute), and specify how long they should spend completing the paper at home (e.g. if it’s a 35 mark homework assignment, then the students would have to time themselves for 35 minutes, if the ratio is 1 mark per minute). You may even want to share a Google Sheet with your students in which they can type their names and exactly how long, in minutes and seconds, it took them to complete the homework. The aim of this exercise would be to improve efficiency over time, with (hopefully) a downward trend being observed – the more past-paper homework the students get, the less time each one should take as the weeks go by. Another adaptation of this, is that you could ask the students to write down how much time it took them to complete the work on the paper itself (if you’re collecting it in and marking it by hand).
#4: Use ‘reverse questioning’
I mentioned this briefly earlier – provide the answers, and ask the students to write what they think the questions are.
This is really good for getting students to think deeply about the knowledge and skills they need to master for the exam, along with deep consideration of command terms and the key vocabulary requirements of their upcoming assessment. For me personally, a common command term that comes up is the word ‘explain’, and it takes time for many students to realise that they need to state why something happens when they are told to explain something. I train my students to always use the word ‘because’ when the question asks them to ‘explain’. For your subject, you may have similar challenges that only be solved by regular past-paper practice and a heavy focus on key vocabulary and command terms.
#5: Use past-paper questions and model answers to create ‘frameworks’
Give students past-exam paper questions and model answers for them use as ‘frameworks’, or skeletons, for building:
Flashcards: A lot of research has shown that flashcards are a brilliant revision tool. They can be created digitally (e.g. on websites like Quizlet) or physically on paper. Make sure the students write/type the question on one-side of the flashcard, and the model answer on the other side. This could even be done as a group activity, with different groups swapping flashcards and testing their knowledge as a plenary session to a lesson.
Consider asking your students to choose a live quiz app and create multiple choice quizzes using past-exam paper questions and model answers.
Mind Maps: Do some research into this, as many educators think Mind Maps are something they actually aren’t. Mind Maps are a very well-defined psychologically favorable learning tool created by the late Dr Tony Buzan (with whom I was very lucky to have a one-to-one video call with just before he passed). Mind Maps need to be created in a certain way in order to be effective, so make sure your students know the rules. Once students know the rules, they’ll then need practice in order to put past-paper questions and model answers onto their Mind Maps. These will often need to be shortened in some way, and illustrated.
Learning Journals: This very popular blog post of mine goes through what learning journals are, and how they can be used as a great revision tool. When used correctly, they can be VERY effective.
Conclusion
Past-exam papers really are the bread-and-butter of effective revision and exam-preparation. Use them to:
Tan, A., & Nicholson, T. (1997). Flashcards revisited: Training poor readers to read words faster improves their comprehension of text. Journal of Educational Psychology, 89(2), 276–288. Available at: https://doi.org/10.1037/0022-0663.89.2.276 (Accessed: 1st May 2022)
We welcome you to join the Richard James Rogers online community! Join us on Facebook and Twitter for regular updates, giveaways of Richard’s books, special offers, upcoming events and news.
